歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

全自動超聲波清洗機的使用需要有加熱功能！

作者：admin來源：http://www.yuehaihotel.com.cn/時間：2022-04-22

　　全自動超聲波清洗機的功能很是強大，它在工作的時候水溫是會緩慢的上升的，這個時候就會有人在想，這溫度都可以自己上升了，為什么還要加入加熱功能呢？

　　The function of automatic ultrasonic cleaning machine is very powerful, it is working when the water temperature will slowly rise, this time there will be someone thinking, this temperature can rise, why to add heating function?

　　全自動超聲波清洗機的加熱功能的目的是為了提高清洗效果，加熱方式顯著提高了清洗效果。通常使用超聲波清洗時，使用的工作溫度為50℃～60℃。由于溫度為50-60攝氏度，大多數活性酶活性較強，是污漬分解的適宜溫度范圍。所以如果需要去油，一定要選擇有溫度調節功能的全自動超聲波清洗機。

　　The purpose of the heating function of the automatic ultrasonic cleaning machine is to improve the cleaning effect, and the heating method significantly improves the cleaning effect. Usually when using ultrasonic cleaning, the working temperature is 50℃ ~ 60℃. Due to the temperature of 50-60 degrees Celsius, most of the active enzyme activity is strong, is the suitable temperature range of stain decomposition. So if you need to oil, be sure to choose the automatic ultrasonic cleaning machine with temperature regulation function.

　　全自動超聲波清洗機工作時水溫確實會慢慢升高，但熱量確實很小，全自動超聲波清洗機越小，這種現象越明顯，因為清洗機的容量越小，在同樣的熱量下，水溫越容易上升。溫升的原因一是換能器和內部電路板工作時會發熱，由于熱量傾向于向上移動，因此大部分熱量被傳遞到水槽。二是空化效應?？栈a(chǎn)生大量微小氣泡，這些氣泡膨脹然后破裂，釋放出大量能量，同時也產生一定的溫度。

　　Automatic ultrasonic cleaning machine does work when the water temperature will slowly rise, but the heat is really very small, automatic ultrasonic cleaning machine is smaller, this phenomenon is more obvious, because the capacity of the cleaning machine is smaller, under the same heat, the water temperature is easier to rise. One reason for the temperature rise is that the transducer and the internal circuit board get hot when they work, and since the heat tends to move upwards, most of it is transferred to the tank. The second is cavitation effect. Cavitation creates lots of tiny bubbles that expand and then burst, releasing a lot of energy as well as a certain temperature.

　　超聲波工作時的自然升溫速度很慢，全自動超聲波清洗機的體積越大，升溫速度越慢。一般大型全自動超聲波清洗機都設計有冷卻系統，以確保長期功能。內部電路的大部分溫度都已消散。其次，體積大，水本身的比熱容比較高，所以加熱比較困難。因此設計了加熱功能，以及溫度控制系統。

　　The natural heating rate of ultrasonic work is very slow, the larger the volume of automatic ultrasonic cleaning machine, the slower the heating rate. General large automatic ultrasonic cleaning machine are designed with cooling system, to ensure long-term function. Most of the heat in the internal circuit has dissipated. Secondly, because of its large volume, the specific heat capacity of water itself is relatively high, so heating is more difficult. Therefore, the heating function and temperature control system are designed.

　　關于全自動超聲波清洗機的使用需要有加熱功能的內容就講解到這里了，如果您在購買或者使用清洗機時有問題，可以通過網站www.yuehaihotel.com.cn來聯系到我們，咨詢相關。

　　About the use of automatic ultrasonic cleaning machine need to have heating function content is explained here, if you have a problem in the purchase or use of cleaning machine, you can contact us through the website www.yuehaihotel.com.cn, consultation related.