歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

碳氫清洗機合適的清洗溫度是多少？

作者：admin來源：http://www.yuehaihotel.com.cn/時間：2022-10-22

碳氫清洗機合適的清洗溫度是多少？在正常情況下，不允許加熱低閃點的碳氫清洗劑進行清洗。高閃點碳氫清洗劑的加熱對溫度控制至關重要。如果是初次使用，請務必在碳氫清洗機專門的技術人員的指導下，做好安全防范工作。

What is the appropriate cleaning temperature for the hydrocarbon washer? Under normal conditions, it is not allowed to heat hydrocarbon cleaning agent with low flash point for cleaning. The heating of high flash point hydrocarbon cleaning agent is very important for temperature control. If it is used for the first time, be sure to do a good job of safety precautions under the guidance of the special technicians of the hydrocarbon washer.

碳氫清洗機清洗溫度主要取決于所用碳氫清洗劑的清洗過程和閃點。隨著加熱溫度的升高，烴類清洗劑的清洗能力一般都有一定程度的提高。然而，由于碳氫的易燃性，清洗溫度越高，碳氫蒸汽的揮發速度越快。因此，在加熱的同時需要嚴格控制加熱溫度。

The cleaning temperature of hydrocarbon cleaning machine mainly depends on the cleaning process and flash point of hydrocarbon cleaning agent used. With the increase of heating temperature, the cleaning ability of hydrocarbon cleaning agents is generally improved to a certain extent. However, due to the flammability of hydrocarbons, the higher the cleaning temperature is, the faster the hydrocarbon vapor volatilizes. Therefore, it is necessary to strictly control the heating temperature while heating.

一般來說，碳氫清洗的溫度控制比碳氫的閃點低15℃左右，因此安全隱患相對較小。因此，有必要綜合考慮碳氫清洗過程和閃點的性質，以設置產品的清洗溫度。

Generally speaking, the temperature control of hydrocarbon cleaning is about 15 ℃ lower than the flash point of hydrocarbon, so the potential safety hazard is relatively small. Therefore, it is necessary to comprehensively consider the hydrocarbon cleaning process and the nature of flash point to set the cleaning temperature of the product.
碳氫清洗機

目前，碳氫清洗機常用的清洗方法主要分為超聲波清洗和真空超聲波清洗。碳氫清洗機清洗工藝的具體選擇應結合待清洗工件和原始清洗工藝確定。

At present, the commonly used cleaning methods of hydrocarbon cleaning machines are mainly divided into ultrasonic cleaning and vacuum ultrasonic cleaning. The specific selection of the cleaning process of the hydrocarbon cleaning machine shall be determined in combination with the workpiece to be cleaned and the original cleaning process.

不同的清洗方法也有各自的特點。比如說，超聲波清洗分為普通超聲波清洗和真空超聲波清洗。普通超聲波清洗，資金投入少，可手動操作，靈活方便。然而，洗滌劑損失和液體更換頻率相對較高。

Different cleaning methods also have their own characteristics. For example, ultrasonic cleaning is divided into ordinary ultrasonic cleaning and vacuum ultrasonic cleaning. Ordinary ultrasonic cleaning, less capital investment, manual operation, flexible and convenient. However, detergent loss and liquid change frequency are relatively high.

盲孔產品的清潔能力較弱。真空超聲清洗投資較大，通常為自動清洗，使用簡單方便。清洗劑損失小，換液頻率低，對有盲孔的產品清洗效果更好。清洗質量更穩定，安全性更強。關注我們www.yuehaihotel.com.cn，帶您了解更多相關內容！

The cleaning ability of blind hole products is weak. Vacuum ultrasonic cleaning has a large investment and is usually automatic cleaning, which is simple and convenient to use. The cleaning agent loss is small, the liquid change frequency is low, and the cleaning effect is better for products with blind holes. The cleaning quality is more stable and the safety is stronger. Follow us at www.yuehaihotel.com.cn to learn more about it!

上一篇：CNC高壓清洗機壓力變小及異常啟動的原因
下一篇：超聲波清洗機的三種清洗功能