歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

檢驗噴淋清洗機清洗效果的三種方式

作者：admin來源：http://www.yuehaihotel.com.cn/時間：2022-11-10

單工位旋轉噴淋清洗機通過動力裝置使高壓柱塞泵產生高壓水來沖洗物體表面的機器。它能將污垢剝離，沖走，達到清洗物體表面的目的。那么，如何檢驗噴淋清洗機清洗后的清洗效果呢？方法有如下幾種，它們分別是：

Single station rotary spray washer is a machine that uses a power device to make the high-pressure plunger pump produce high-pressure water to wash the surface of objects. It can peel and wash away the dirt to clean the surface of objects. Then, how to check the cleaning effect of the spray washer after cleaning? The methods are as follows:

(一)隨機抽樣法

（1） Random sampling method

這種檢測方法適合于清洗對象比較煩多的情況下，由于時間的關系，我們不能對清洗對象進行一一的檢測，這個時候我們往往需要隨機抽取出個別清洗對象來進行檢測，由它的檢驗結果來判定所有清洗對象的潔凈程度。使用此種方法需要注意的是，要選取一定的檢測數量才能較準確地反映整體情況。

This detection method is suitable for the situation that there are too many cleaning objects. Due to the time relationship, we cannot detect the cleaning objects one by one. At this time, we often need to randomly select individual cleaning objects for detection, and determine the cleanliness of all cleaning objects according to their inspection results. When using this method, it should be noted that a certain number of tests should be selected to accurately reflect the overall situation.
單工位旋轉噴淋清洗機

(二)以污染很嚴重的部位作為檢驗標準來進行測定

（2） Take the seriously polluted parts as the inspection standard for determination

當我們使用這種方法來進行檢測時，如果污染很嚴重的部位，其潔凈程度已達到要求，那么，其他污染程度不嚴重的部位其清洗效果一般都能夠達到潔凈程度的要求。

When we use this method to detect, if the cleanliness of seriously polluted parts has met the requirements, then the cleaning effect of other parts with less serious pollution can generally meet the requirements of cleanliness.

(三)對特定污垢進行專門檢測

（3） Special test for specific dirt

這種檢測方法就是選擇影響很大的污垢進行測定。一般的機械部件進行脫脂清洗適合選用此種方法，此時的檢測重點是油性污垢而不用對其他污垢再進行具體的檢測。這種檢測方法同樣能夠檢驗出清洗對象的潔凈程度。

This test method is to select the dirt that has a great impact on the test. This method is suitable for degreasing and cleaning of general mechanical parts. At this time, the focus of detection is oily dirt instead of specific detection of other dirt. This detection method can also detect the cleanliness of the cleaning object.

檢驗噴淋清洗機清洗效果的三種方式就是以上所講解的內容了，您對此有什么想咨詢的問題或者有采購需求就就來聯系我們www.yuehaihotel.com.cn吧！

The three ways to check the cleaning effect of the spray washer are the contents explained above. If you have any questions or purchase needs, please contact us at www.yuehaihotel.com.cn!

上一篇：碳?xì)淝逑礄C(jī)的幾個關鍵注意點
下一篇：高壓噴淋清洗設備的清洗過程