歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

CNC高壓清洗機常見的故障情況以及處理

作者：admin來源：http://www.yuehaihotel.com.cn/時間：2023-03-28

CNC高壓清洗機是一種利用高壓水流進行清洗的設備，主要應用于工業生產、汽車維修、建筑清洗和船舶清洗等領域。它采用高壓水泵將水壓提高到很高的水平，通過噴嘴將高壓水流噴射到需要清洗的物體表面，從而達到徹底清洗的效果。CNC高壓清洗機常見的故障有以下幾種情況及處理方法：

CNC high-pressure cleaning machine is a device that uses high-pressure water flow for cleaning, mainly used in industrial production, automobile maintenance, building cleaning, and ship cleaning. It uses a high-pressure water pump to raise the water pressure to a very high level, and sprays high-pressure water through a nozzle to the surface of the object that needs to be cleaned, thereby achieving a thorough cleaning effect. Common faults of CNC high-pressure cleaning machines include the following situations and handling methods:

高壓泵無法啟動：首先檢查電源是否正常，檢查電源開關是否打開，保險絲是否燒斷。如果電源正常，檢查高壓泵是否有故障，如故障，需要進行修理或更換。

The high-pressure pump cannot be started: first, check whether the power supply is normal, check whether the power switch is turned on, and whether the fuse is blown. If the power supply is normal, check whether the high-pressure pump has faults. If so, repair or replace it.

壓力不穩定：檢查高壓泵是否正常工作，是否存在漏水、壓力表是否損壞等問題。如果存在問題，需要進行維修或更換。

Pressure instability: Check whether the high-pressure pump operates normally, whether there are water leaks, and whether the pressure gauge is damaged. If there is a problem, it needs to be repaired or replaced.

清洗效果不好：可以檢查噴嘴是否堵塞或磨損，如果是，需要進行清理或更換。同時，還需要檢查水管路是否完好，水壓是否正常，是否需要更換濾網等。

Poor cleaning effect: Check whether the nozzle is blocked or worn, and if so, clean or replace it. At the same time, it is also necessary to check whether the water pipeline is in good condition, whether the water pressure is normal, and whether the filter screen needs to be replaced.

清洗過程中出現異響或震動：可能是清洗機內部零件松動或磨損所導致，需要進行檢查和維修。

Abnormal noise or vibration during cleaning: This may be caused by loose or worn internal parts of the cleaning machine, requiring inspection and maintenance.
CNC高壓清洗機

清洗機漏水：可以檢查密封處是否有磨損或損壞，需要更換密封件；或者檢查水管路是否完好，需要更換管道或接頭等。

Water leakage of the cleaning machine: it is possible to check whether the sealing part is worn or damaged, and it is necessary to replace the sealing part; Or check whether the water pipe is in good condition, and replace the pipe or joint, etc.

清洗機無法停止：檢查電源是否正常，檢查電磁閥是否正常工作，需要進行維修或更換。

The cleaning machine cannot be stopped: Check whether the power supply is normal, check whether the solenoid valve is working properly, and repair or replacement is required.

總之，CNC高壓清洗機的故障處理需要根據具體情況進行維修或更換，需要注意安全、維護好設備，定期進行保養和檢查，以避免發生故障。如果無法自行處理，可以請的維修人員進行檢查和維修。更多事項就來我們網站http://www.yuehaihotel.com.cn咨詢了解吧!

In summary, troubleshooting of CNC high-pressure cleaning machines requires repair or replacement based on specific circumstances. Attention should be paid to safety, equipment maintenance, and regular maintenance and inspection to avoid failures. If you cannot handle it yourself, you can ask professional maintenance personnel for inspection and maintenance. For more information, please visit our website http://www.yuehaihotel.com.cn Consult and understand!

上一篇：通過式噴淋清洗機的基本原理以及其他常識
下一篇：碳氫清洗機的清洗效果與優勢