歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

運行碳氫清洗機前后的注意事項

作者：admin來源：http://www.yuehaihotel.com.cn/時間：2022-12-03

碳氫清洗機的優勢比較多，但是在使用過程中，也會因為操作失誤出現故障。很多時候就需要我們在操作環保碳氫清洗機的時候多加注意了，接下來小編為您講解相關事項。

The hydrocarbon washer has many advantages, but in the process of use, it will also fail due to operational errors. Many times, we need to pay more attention when operating the environment-friendly hydrocarbon cleaning machine. Next, we will explain the relevant matters for you.

一般來說在運行碳氫清洗機之前就要先接通設備電源，水源，氣源。然后工作人員要先去檢查進水壓力須達到0.3～0.5MPa，這個時候如果它的進水壓力低于0.15MPa。

Generally speaking, the equipment power, water source and gas source shall be connected before the hydrocarbon washer is operated. Then the staff should check that the water inlet pressure must reach 0.3~0.5MPa, if the water inlet pressure is lower than 0.15MPa at this time.

就要在電控箱上的黃色按鈕燈亮，設備無法啟動。然后在進行調整進水壓力大于0.15MPa，接著按黃色按鈕復位，在黃燈不亮的情況下，碳氫清洗機設備就可以啟動了。

The yellow button on the electric cabinet will light up, and the equipment cannot be started. Then adjust the water inlet pressure to be greater than 0.15 MPa, and then press the yellow button to reset. When the yellow light is not on, the hydrocarbon washer can be started.
碳氫清洗機

除此以外，在用碳氫清洗機的時候還需要大家定期檢查和清洗進水過濾器和濾網，一定要保持它的濾網進水清潔、暢通。

In addition, when using the hydrocarbon washer, you also need to regularly check and clean the water inlet filter and filter screen, and make sure that the water inlet of the filter screen is clean and unblocked.

這是很重要的一點，之前就會有很多用戶在用的時候不注意這一點，經常就會出現濾網的情況，要是長時間操作的話對于設備的運行效果影響是很大的，嚴重的話還會損壞設備的。所以說定期的檢查也是不可忽視的一個問題。

This is a very important point. Many users have not paid attention to this before, and the filter screen often occurs. If the filter screen is operated for a long time, the operation effect of the equipment will be greatly affected, and the equipment will be damaged in serious cases. Therefore, regular inspection is also a problem that cannot be ignored.

操作人員在使用碳氫清洗機的時候還需要把它的曲軸箱油位和油質也是要定期去查看的。一定要按照技術文件要求定期更換潤滑機油。更多相關內容就來我們網站www.yuehaihotel.com.cn咨詢了解吧！

When using the hydrocarbon washer, the operator also needs to check its crankcase oil level and oil quality regularly. The lubricating oil must be replaced regularly according to the requirements of the technical documents. Come to our website www.yuehaihotel.com.cn for more information!

上一篇：多槽手動超聲波清洗機清洗物件注意三點
下一篇：通過式清洗機使用時存在異常的表現